Pulastic GT 100

Pulastic GT 100

Seamless point-elastic floor covering for indoor multi-purpose use

Product Description

Pulastic GT 100 is a high-end multifunctional sports floor for wellness and fitness activities requiring high impact resistance and providing excellent comfort and safety for training, combined with excellent resistance to mechanical loads.

Pulastic GT 100 is manufactured under ISO 9001 for quality control and ISO 14001 for environmental care.

Uses

  • Indoor
  • Training and competition of wellness and fitness activities requiring high
  • impact resistance
  • Physical education
  • Cultural events, exhibitions and a variety of non-athletic activities typical
  • for multi-purpose facilities.

Characteristics / Advantages

  • High impact resistance; extremely suitable for free weight areas
  • Low odour emitting composition
  • Excellent contact noise reduction (acoustic isolation)
  • Smooth, silky gloss finish for easy maintenance
  • Seamless, non-porous surface preventing penetration of sweat and other liquids, minimizing risk of fungus build-up
  • Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through outstanding mechanical strength and wear resistance
  • Outstanding mechanical strength and wear resistance for minimum life cycle cost and maximum usability (return on investment)
  • Excellent resiliency for comfort and injury prevention
  • Outstanding thermal insulation
  • Wide colour selection with outstanding colour fastness

Product Data

16 Classic colours and 16 Design colours as per manufacturers colour brochure.

Technical Data / System

Nominal thickness 10 mm
Shock absorption 20 % EN 14808
Vertical Deformation 1,0 mm EN 14809
Linear Friction (dry) 70 EN 13036-4
Linear Friction (damp) R9 Leroux
Ball Bounce 98 % EN 12235
Gloss 3 -7% EN 2813
Resistance to rolling load 0,05 mm EN 1569
Resistance to impact > 800 gr @ 10°C EN 1517
> 1200 gr @ 17°C EN 1517
Resistance to indentation 0,50 mm @ 5 min EN 1516
0,15 mm @ 24 hrs EN 1516
Resistance to wear 150 mg EN ISO 2813
Flammability Cfl-S2 EN 13501-1

Technical Data / Components

V.O.C. content - adhesive Solvent free
V.O.C. content - finish 0,01 gr/lit (EU) 2004/42/EG
Resin composition Free of solvents and heavy metals
Elongation at break 230 % DIN 53455
Tensile strength 11 N/mm² DIN 53455
Tear strength 28 N/mm DIN 53515

Conditions / Limitations Installation

Installation shall be carried out corresponding to manufacturers installation instructions, by a manufacturer trained installer.

The subfloor shall correspond to manufacturers document “requirements prior to the installation of a Pulastic sports floor”.

Cleaning / Maintenance

The instructions for pre-treatment and cleaning corresponding to manufacturers document “Initial use and general maintenance tips for your Pulastic sports floor” shall be carried out to promote hygiene and assure that the floor retains its matt appearance and proper grip/sliding characteristics. This improves safety and enhances sport performance.

Value Base

All technical data stated in this System Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control