ASB System 100

The Construction thickness of ASB System 100 walls is 100mm, consisting of two high density boards, 18mm thick, kept apart by aluminum I-profiles. The cavity between the panels is filled with a fire-dried sand, granulation 1-3mm. Its main function is to absorb ball impact’s energy to guarantee and secure the ball’s correct and consistant rebound.

ASB system courts can be moved to another location at a later stage. If desired, System 100 walls are self-supporting and independent from other building walls, due to installation upon custom made sockets, elevating the walls 75mm above the raw floor and thus securing them from rising humidity.

Prior to leaving the factory the wall panels are pre-coated with a special ASB coating. One further coat of primer and the final coating are applied on site. The surface of the court is hard, flat and free of joints, providing the necessary grip for the squash balls.

The ASB system 100 front wall

• Consists of only 3 high density boards
• The total weight after filling with the fire dried sand is 4.6t

The ASB System 100 Side wall

• Consists of only 4 high density boards
• The total weight after filling with the fire dried sand is 4.4t